宣工TY165A 液力推土机参数配置

TY165ATY165A推土机性能简介TY165A Bulldozer TY165A推土机系半刚性悬挂、液力机械传动、液压操纵的履带推土机。可用于道路修筑、水电工程、农田改造、港口建设矿山开发及其它建筑工程项目的土石方作业。TY165 bulldozer is semi-rigid suspended, power shift, hydraulically controlled and track-type. It is applicable for road construction, water and electricity engineering farmland leveling, port building, mining and other engineering conditions. 主机性能参数 标准型：配直倾铲）Main specifications （standard type: straight dozer） 外形尺寸(长×宽×高) 　5336×3297×3161.5mm 使用质量 　　　　　　　17.8t飞轮功率 　　　　　　　121 kW最大牵引力 　　　　　　 139.6 kN(有效牵引力取决于机重和地面附着性能)接地压力（使用质量） 67 kPa最小转弯半径　　　　　　　4 m最小离地高度 　　　　　　352.5 mm坡行角度　　　　　　　　　纵向 30度　　横向 25度Overall dimensions (L×W×H) : 5336×3297×3161.5 mm Operation weight : 17.8tFlywheel power : 121kWMax. drawbar pull: 139.6 kNGround pressure (at operating weight): 67 kPaMin. ground radium: 4 mMin. ground clearance: 352.5 mmGrade ability: Straight 30°　 Side 25°(The efficient force depends on weight and ground surface adherence)柴油机Diesel engine 制造厂家 潍坊柴油机股份有限公司型号 WD615T1-3C形式 　　　　　　 水冷、单行、立式、四冲程、涡轮增压缸数--缸径X行程 　 6-126×130总排量　　　　　　 9.72 L 额定转速 1900 r/min标定功率 131 kW油耗（标定功率时）燃油消耗量 ≤225 g/kW·h机油消耗量 ≤0.8 g/kW·h最大扭矩(≤1400 r/min) ≥870 N·m冷却方式 闭式循环水冷却启动方式 24V电启动Manufactured factory: WEICHAI DIESEL ENGINE CO., LTDModel: WD615T1-3CType: water-cooled, single-row,vertical,4-stroke-cycle,turbo-chargedCylinders Number-bore diameter×travel distance: 6-126×130mmDisplacement: 9.72L Rated RPM: 1900r/minRated power: 131kW Oil consumption: (at rated power output)Fuel consumption: ≤225 g/kW·hLube oil consumption ≤0.8 g/kW·hMax. torque (≤1400 r/min) ≥870N·mCooling method: closed circulation water cooling Starting method: by electric 24V 变矩器与变速箱Torque converter and transmission变矩器为单级三元件结构。输出动力平稳，具有良好性能。变速箱为行星齿轮传动，动力换档变速箱。前进三档，后退三档。可实现挡位和方向的快速变换。行驶速度（按柴油机1900r/min时理论速度）前进一档 0—3.32 km/h 后退一档 0—4.0 km/h前进二档 0—6.26 km/h 后退二档 0—7.57 km/h前进三档 0—11.40km/h 后退三档 0—13.87km/hSingle-stage, three unites structure torque converter.output power is stable with high performance.Planetary, power shift transmission with three speeds forward and three speeds reverse. Speed and direction can be quickly shifted.Travel speed (in theory 1900r/min engine speed):Forward Reverse First speed 0—3.32 km/h First speed 0—4.00 km/h Second speed 0—6.26 km/h Second speed 0—7.57 km/h Third speed 0—11.40km/h Third speed 0—13.87km/h转向与制动Steering and braking转向离合器为湿式、多片、粉末冶金摩擦片、弹簧压紧、液压分离。制动器为湿式、浮动、双向带式、脚踏式机械操纵，液压助力，可实现转向与制动联动The steering clutch is tighten by pressured springs and separated hydraulically with oil-type, multi-powder-metal discs.The brakes are oil, two-direction floating band with mechanism foot pedals, hydraulic boosted. The steering and braking can be actuated in one control.最终传动Final drive两级直齿轮减速，浮动油封密封，链轮采用组合式，便于维修。The final drives are double reduction with spur gear and segment sprocket, which are sealed by duo-cone seal行走系统Undercarriage system行走架为槽钢钢板焊接矩形截面，八字梁型式。支重轮、托链轮、引导轮均装有密封性能好、寿命长的浮动油封。单侧支重轮数量 单边4个，双边2个单侧托链轮数量 2个单侧引导轮数量 1个履带型式 单履齿组合式。履带涨紧型式 液压涨紧节距 203 mm单侧履带板数量 38块履带板宽度 500mm履带接地长度 2570mm密封和润滑履带 （可选购件）该履带的节距、履带板数量、履带板宽度与普通履带相同。The undercarriage is section steel welded track roller frame with diagonalbrace.The track rollers, carrier rollers and front idlers have the same floating seals which are long-service life and seal well.Number of track rollers: 4 single-flange on each side 2 double-flange on each sideNumber of carrier roller : 2 on each side Number of front idler: one on each sideTrack type: single grouser, modular type. Track adjuster type: by hydraulically adjustPitch: 203 mmNumbers of shoe: 38Width of shoe: 500mmLength of track on ground: 2570mmSealed and lubricated track (0ptional parts) The pitch, number of shoes, width of shoe are the same with ordinary track工作装置液压系统Implement hydraulic system由装置油泵、液压控制箱及各种阀、油缸、滤油器和管路组成油泵型式 齿轮油泵油泵流量 190 L/min系统压力 11.76 MPa单阀（内置）：用于角铲,可实现铲刀油缸的提升、封闭、下降、浮动。双阀（内置）：用于直倾铲。可实现铲刀油缸的提升、封闭、下降、浮动，同时侧倾缸左侧倾、右侧倾、封闭。侧倾缸的左右侧倾和封闭双阀（一个内置、一个外置）：用于角铲、松土器。三阀（二个内置、一个外置）：用于直倾铲、松土器。It consists of two group gear pump ,pilot valve, main valve , cylinders, oil filter and lines.Pump type: gear oil pumpFront pump : 190L/min System pressure: 11.76 MPaSingle valve ( inter ): for angle dozer, The dozer cylinder can raise ,hold, lower and float.Two valve ( internal ): for straight dozer, The dozer cylinder can raise ,hold, lower and float.and the tilt cylinder can tilt left, tilt right and hold.Two valve ( one internal ,one outer): for angle dozer and ripper. The ripper can raise ,lower and hold.Three valve ( two internal ,one outer): for straight dozer and ripper.底盘液压系统Basic hydraulic system 油泵型式 齿轮油泵油泵流量 135 L/min系统压力 2.35 MPaPump type: gear oil pumpSystem output: 135 L/minSystem pressure: 2.35 MPa驾驶室Cab噪音低、视野宽阔、可调式的司机座椅，并配备电风扇。备有以下驾驶室供用户选用1. 带空调器的驾驶室。2. 翻车保护司机凉棚。3. 简易司机凉棚。The cab with adjustable seat features low noise and wide visible range and contains electrical fan.The different kinds of cabs as follow can be chosen:1. Cab with air-conditioner 2. Cab with Rops canopy3. Simlpe structure canopy. 加注容量Service refill加注部位 容量（L）水箱及柴油机冷却水 60 柴油机润滑系统用油 25分动箱、变矩器 变速箱、后桥传动用油 95最终传动用油（单侧） 24工作装置液压系统用油 85柴油箱装柴油 230支重轮、托链轮、引导轮用油（每个） 0.35Fill location Capacity(L)Radiator and diesel engine water: 60Lubricating system of diesel engine Oil: 25Flywheel house, Torque converter ,Transmission, bevel gear case Oil: 95Final drive(each side) Oil: 24Implement hydraulic system Oil: 85Fuel tank Oil: 230Track roller, carrier roller, front idler(each) Oil: 0.35推土铲主要参数Blade specifications铲刀型式 直倾铲 Blade Straight 铲刀宽度（Width） 3297 mm 铲刀高度（Height） 1170 mm 最大切削深度（Max digging depth）: 475 mm 最大提升高度（Max. ground clearance）: 900 mm 垂直倾斜角(Vertical tilting angle): 8.5° 铲刀容量（Blade capacity）: 4.5 m³ 松土器主要参数：Ripper specifications松土齿数： 3个长 ： 1580mm宽： 2020mm高： 1236mm最大松土深度：550mm最大提升高度：510mmNumber of shank : three Length : 1580mmWidth : 2020mmMax. Penetration depth : 550mmMax. Lifting height : 510mm